Bladder Vessel

SIPL’s Bladder Surge Vessel is a surge control device installed with a butyl rubber bladder. A pre-charge pressure is calculated to give the required elasticity to push the water into the system following a pump trip. As there is no contact between the compressed air and the water, there is no dissolution. Thus, there is no requirement for a permanent regulation system including compressors, etc. Once the vessel has been commissioned and the correct pre-charge has been introduced, the vessel will operate automatically, emptying when called upon and refilling with the return waves until naturally reaching its steady state balance.

 Materials :– SA 516 Gr 70

     Standard: -ASME Sec VIII Div 1

     Application: -Surge Protection System

     Capacity: – 1 m3 to 45 m3

     Medium: – Raw Water, Sewage Water

     Pressure Rating: – PN 10, PN 16 & PN 25